{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-County-Census Tract for Alabama, 1:500,000","description":" Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program.  The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate.  The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses.  Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people.  When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions.  The spatial size of census tracts varies widely depending on the density of settlement.  Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions.  In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline.  Census tract boundaries generally follow visible and identifiable features.  They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses.  State and county boundaries always are census tract boundaries in the standard census geographic hierarchy.  In a few rare instances, a census tract may consist of noncontiguous areas.  These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous.  For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area","keyword": ["Boundaries","2014","SHP","Cartographic Boundary","Census Tract","County","Generalized","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_tract_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_tract_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_tract_500k.zip"}],"isPartOf": "Series Information for the 2014 County-Census Tract  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-State Legislative District (Upper Chamber) for Alabama, 1:500,000","description":" SLDU stands for State Legislative District Upper Chamber.  State Legislative Districts (SLDs) are the areas from which members are elected to State legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by State participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, Maine, Maryland, Massachusetts, Michigan, Ohio, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation.","keyword": ["Boundaries","2014","SHP","Cartographic Boundary","Generalized","State","State Legislative District","Upper Chamber","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_sldu_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_sldu_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_sldu_500k.zip"}],"isPartOf": "Series Information for the 2014 State Legislative District (Upper Chamber)  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-Place for Alabama, 1:500,000","description":" The Cartographic boundary shapefiles include both incorporated places (legal entities) and census designated places or CDPs (statistical entities).  An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population.  Places always nest within a state, but may extend across county and county subdivision boundaries.  An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions.  CDPs are delineated for the decennial census as the statistical counterparts of incorporated places.  CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located.  The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity.  CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary.  The only population/housing size requirement for CDPs is that they must contain some housing and population","keyword": ["Boundaries","2014","SHP","Cartographic Boundary","Generalized","Place","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_place_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_place_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_place_500k.zip"}],"isPartOf": "Series Information for the 2014 Place  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, Urban Area-State-County for Alabama, 1:500,000","description":" The records in this file allow users to map the parts of Urban Areas that overlap a particular county","keyword": ["Boundaries","2014","SHP","Cartographic Boundary","County","Generalized","State","UA","UC","Urban Area","Urban Cluster","Urbanized Area","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_county_within_ua_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_county_within_ua_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_county_within_ua_500k.zip"}],"isPartOf": "Series Information for the 2014 County  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-PUMA for Alabama, 1:500,000","description":" After each decennial census, the Census Bureau delineates Public Use Microdata Areas (PUMAs) for the tabulation and dissemination of decennial census Public Use Microdata Sample (PUMS) data, American Community Survey (ACS) PUMS data, and ACS period estimates. Nesting within states, or equivalent entities, PUMAs cover the entirety of the United States, Puerto Rico, Guam, and the U.S. Virgin Islands. PUMA delineations are subject to population, building block geography, geographic nesting, and contiguity criteria. Each PUMA is identified by a 5-character numeric census code that may contain leading zeros and a descriptive name","keyword": ["Boundaries","2014","KML","Cartographic Boundary","Generalized","Public Use Microdata Area","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_puma10_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_puma10_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_puma10_500k.zip"}],"isPartOf": "Series Information for the 2014 PUMA  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-PUMA for Alabama, 1:500,000","description":" After each decennial census, the Census Bureau delineates Public Use Microdata Areas (PUMAs) for the tabulation and dissemination of decennial census Public Use Microdata Sample (PUMS) data, American Community Survey (ACS) PUMS data, and ACS period estimates. Nesting within states, or equivalent entities, PUMAs cover the entirety of the United States, Puerto Rico, Guam, and the U.S. Virgin Islands. PUMA delineations are subject to population, building block geography, geographic nesting, and contiguity criteria. Each PUMA is identified by a 5-character numeric census code that may contain leading zeros and a descriptive name","keyword": ["Boundaries","2014","SHP","Cartographic Boundary","Generalized","Public Use Microdata Area","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_puma10_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_puma10_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_puma10_500k.zip"}],"isPartOf": "Series Information for the 2014 PUMA  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, Urban Area-State-County for Alabama, 1:500,000","description":" The records in this file allow users to map the parts of Urban Areas that overlap a particular county","keyword": ["Boundaries","2014","KML","Cartographic Boundary","County","Generalized","State","UA","UC","Urban Area","Urban Cluster","Urbanized Area","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_county_within_ua_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_county_within_ua_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_county_within_ua_500k.zip"}],"isPartOf": "Series Information for the 2014 County  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-County-Census Tract-Block Group for Alabama, 1:500,000","description":" Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered within census tracts.  BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same decennial census.  For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that census tract.  BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. Block groups generally contain  between 600 and 3,000 people.  A BG usually covers a contiguous area but never crosses county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas","keyword": ["Boundaries","2014","SHP","Block Group","Cartographic Boundary","Census Tract","County","Generalized","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_bg_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_bg_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_bg_500k.zip"}],"isPartOf": "Series Information for the 2014 County-Census Tract-Block Group  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-County-Census Tract for Alabama, 1:500,000","description":" Census tracts are small, relatively permanent statistical subdivisions of a county or equivalent entity, and were defined by local participants as part of the 2010 Census Participant Statistical Areas Program.  The Census Bureau delineated the census tracts in situations where no local participant existed or where all the potential participants declined to participate.  The primary purpose of census tracts is to provide a stable set of geographic units for the presentation of census data and comparison back to previous decennial censuses.  Census tracts generally have a population size between 1,200 and 8,000 people, with an optimum size of 4,000 people.  When first delineated, census tracts were designed to be homogeneous with respect to population characteristics, economic status, and living conditions.  The spatial size of census tracts varies widely depending on the density of settlement.  Physical changes in street patterns caused by highway construction, new development, and so forth, may require boundary revisions.  In addition, census tracts occasionally are split due to population growth, or combined as a result of substantial population decline.  Census tract boundaries generally follow visible and identifiable features.  They may follow legal boundaries such as minor civil division (MCD) or incorporated place boundaries in some States and situations to allow for census tract-to-governmental unit relationships where the governmental boundaries tend to remain unchanged between censuses.  State and county boundaries always are census tract boundaries in the standard census geographic hierarchy.  In a few rare instances, a census tract may consist of noncontiguous areas.  These noncontiguous areas may occur where the census tracts are coextensive with all or parts of legal entities that are themselves noncontiguous.  For the 2010 Census, the census tract code range of 9400 through 9499 was enforced for census tracts that include a majority American Indian population according to Census 2000 data and/or their area was primarily covered by federally recognized American Indian reservations and/or off-reservation trust lands; the code range 9800 through 9899 was enforced for those census tracts that contained little or no population and represented a relatively large special land use area such as a National Park, military installation, or a business/industrial park; and the code range 9900 through 9998 was enforced for those census tracts that contained only water area, no land area","keyword": ["Boundaries","2014","KML","Cartographic Boundary","Census Tract","County","Generalized","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_tract_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_tract_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_tract_500k.zip"}],"isPartOf": "Series Information for the 2014 County-Census Tract  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-Place for Alabama, 1:500,000","description":" The Cartographic boundary shapefiles include both incorporated places (legal entities) and census designated places or CDPs (statistical entities).  An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population.  Places always nest within a state, but may extend across county and county subdivision boundaries.  An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions.  CDPs are delineated for the decennial census as the statistical counterparts of incorporated places.  CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located.  The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity.  CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary.  The only population/housing size requirement for CDPs is that they must contain some housing and population","keyword": ["Boundaries","2014","KML","Cartographic Boundary","Generalized","Place","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_place_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_place_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_place_500k.zip"}],"isPartOf": "Series Information for the 2014 Place  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-County-County Subdivision for Alabama, 1:500,000","description":" County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories.  For the 2010 Census, the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs for Census 2000 to having MCDs for the 2010 Census.  In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical unorganized territories to complete coverage.  The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions.  The boundaries of most legal MCDs are as of January 1, 2013, as reported through the Census Bureau's Boundary and Annexation Survey (BAS)","keyword": ["Boundaries","2014","SHP","Cartographic Boundary","County","County Subdivision","Generalized","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_cousub_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_cousub_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_cousub_500k.zip"}],"isPartOf": "Series Information for the 2014 County-County Subdivision  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-State Legislative District (Upper Chamber) for Alabama, 1:500,000","description":" SLDU stands for State Legislative District Upper Chamber.  State Legislative Districts (SLDs) are the areas from which members are elected to State legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by State participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, Maine, Maryland, Massachusetts, Michigan, Ohio, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation.","keyword": ["Boundaries","2014","KML","Cartographic Boundary","Generalized","State","State Legislative District","Upper Chamber","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_sldu_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_sldu_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_sldu_500k.zip"}],"isPartOf": "Series Information for the 2014 State Legislative District (Upper Chamber)  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-State Legislative District (Lower Chamber) for Alabama, 1:500,000","description":" SLDL stands for State Legislative District Lower Chamber.  State Legislative Districts (SLDs) are the areas from which members are elected to State legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by State participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, Maine, Maryland, Massachusetts, Michigan, Ohio, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation.","keyword": ["Boundaries","2014","SHP","Cartographic Boundary","Generalized","Lower Chamber","Lower District","State","State Legislative District","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_sldl_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_sldl_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_sldl_500k.zip"}],"isPartOf": "Series Information for the 2014 State Legislative District (Lower Chamber)  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-County-County Subdivision for Alabama, 1:500,000","description":" County subdivisions are the primary divisions of counties and their equivalent entities for the reporting of Census Bureau data. They include legally-recognized minor civil divisions (MCDs) and statistical census county divisions (CCDs), and unorganized territories.  For the 2010 Census, the MCDs are the primary governmental and/or administrative divisions of counties in 29 States and Puerto Rico; Tennessee changed from having CCDs for Census 2000 to having MCDs for the 2010 Census.  In MCD States where no MCD exists or is not defined, the Census Bureau creates statistical unorganized territories to complete coverage.  The entire area of the United States, Puerto Rico, and the Island Areas are covered by county subdivisions.  The boundaries of most legal MCDs are as of January 1, 2013, as reported through the Census Bureau's Boundary and Annexation Survey (BAS)","keyword": ["Boundaries","2014","KML","Cartographic Boundary","County","County Subdivision","Generalized","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_cousub_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_cousub_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_cousub_500k.zip"}],"isPartOf": "Series Information for the 2014 County-County Subdivision  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-County-Census Tract-Block Group for Alabama, 1:500,000","description":" Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered within census tracts.  BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same decennial census.  For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that census tract.  BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. Block groups generally contain  between 600 and 3,000 people.  A BG usually covers a contiguous area but never crosses county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas","keyword": ["Boundaries","2014","KML","Block Group","Cartographic Boundary","Census Tract","County","Generalized","State","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_bg_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_bg_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_bg_500k.zip"}],"isPartOf": "Series Information for the 2014 County-Census Tract-Block Group  1:500,000",},
{"@type": "dcat:Dataset","title": "2014 Cartographic Boundary File, State-State Legislative District (Lower Chamber) for Alabama, 1:500,000","description":" SLDL stands for State Legislative District Lower Chamber.  State Legislative Districts (SLDs) are the areas from which members are elected to State legislatures. The SLDs embody the upper (senate) and lower (house) chambers of the state legislature. Nebraska has a unicameral legislature and the District of Columbia has a single council, both of which the Census Bureau treats as upper-chamber legislative areas for the purpose of data presentation; there are no data by SLDL for either Nebraska or the District of Columbia. A unique three-character census code, identified by State participants, is assigned to each SLD within a state. In Connecticut, Illinois, Louisiana, Maine, Maryland, Massachusetts, Michigan, Ohio, and Puerto Rico, the Redistricting Data Program (RDP) participant did not define the SLDs to cover all of the state or state equivalent area. In these areas with no SLDs defined, the code "ZZZ" has been assigned, which is treated as a single SLD for purposes of data presentation.","keyword": ["Boundaries","2014","KML","Cartographic Boundary","Generalized","Lower Chamber","Lower District","State","State Legislative District","Alabama","AL",],"modified":"201505","publisher":{"name": "Cartographic Products Branch","subOrganizationOf":{ "name": " Geography Division","subOrganizationOf":{ "name": " U.S. Census Bureau","subOrganizationOf":{ "name": "U.S. Department of Commerce",}}}},"contactPoint": {"fn":"U.S. Department of Commerce, U.S. Census Bureau, Geography Division/Cartographic Products Branch","hasEmail":"geo.geography@census.gov"},"identifier":"cb_2014_01_sldl_500k.xml","accessLevel":"public","bureauCode":"006:07","programCode":"006:07","spatial":"{\"type\":\"Polygon\",\"coordinates\":[[[-88.473227,35.008028],[-84.88908,30.223334],[-84.88908,35.008028],[-88.473227,30.223334],[-88.473227,35.008028]]]}","temporal":"201505/201505","accrualPeriodicity":"irregular","language": ["en-US"],"distribution":[{"@type": "dcat:Distribution","downloadURL": "http://www2.census.gov/geo/tiger/GENZ2014/cb_2014_01_sldl_500k.zip","mediaType": "PK-ZIP, version 1.93A or higher","title": "cb_2014_01_sldl_500k.zip"}],"isPartOf": "Series Information for the 2014 State Legislative District (Lower Chamber)  1:500,000",},